background image

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

To reduce the risk of electric shock: do not remove cover(or back).

No user serviceable parts inside. Refer  servicing to qualified service personnel.

WARNING:

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CAUTION:

Use of controls or adjustments or performance of procedures other than those specified 
may result in  hazardous radiation exposures.

CAUTION

For Compact Disc Units Only:
INVISIBLE LASER RADIATION WHEN OPEN  AND INTERLOCK  FAILED 
OR DEFEATED, AVOID DIRECT EXPORSURE TO LASER BEAM.

(

See markings on the back of  the unit

.)

CAUTION

:

To prevent electric shock, match wide blade of plug to wide slot, fully insert

.

14. Lightning

 - For added protection for this product during a lightning storm, or when it is 

left unattended and unused for long periods of time, unplug it from the wall outlet and  
disconnect the antenna or cable system. This will prevent damage to the product due to 
lightning and power-line surges.

15. Power Lines

 - An outside antenna system should not be located in the vicinity of 

overhead power lines or other electric light or power circuits, or where it can fall into such 
power lines or circuits. When installing an outside antenna system, extreme care should be 
taken to keep from touching such power lines or circuits as contact with them might  be fatal.

16. Overloading

 - Do not overload wall outlets, extension cords, or integral convenience 

receptacles as this can result in a risk of fire or electric shock.

17. Object and Liquid Entry

 - Never push objects of any kind into this product through 

openings as they may touch dangerous voltage points or short-out parts that could result in 
a fire or electric shock. Never spill liquid of any kind on the product.

18. Servicing

 - Do not  attempt to service this product yourself as opening or removing 

covers may expose you to dangerous voltage or other hazards. Refer all servicing to 
qualified service personnel.

19. Damage Requiring Service

 - Unplug this product from the wall outlet and refer 

servicing to qualified service personnel under the following conditions:

a.

 If the power-supply cord or plug is damaged.

b.

 If liquid has spilled, or objects have fallen into the product.

c.

 If the product has been exposed to rain or water.

d.

 If the product does not operate normally by following the operating instructions. Adjust 

only those controls that are covered by the operating instructions, as an improper ajustment 
of other controls may result in damage and will often require extensive work by a qualified 
technician to restore the product to its normal operation.

e.

 If the product has been dropped or damaged in any way, and if the product exhibits a 

distinct change in performance-this indicates a need for service. 

20. Replacement Parts 

- When replacement parts are required, be sure the service 

technician has used replacement parts specified by the manufacturer or have the same 
characteristics as the original part. Unauthorized substitutions may result in fire, electric 
shock, or other  hazards.

21. Safety Check

 - Upon completion of any service or repairs to this product, ask the 

service technician to perform safety checks to determine that the product is in proper 
operating condition.

22. Wall or Ceiling Mounting

 - The product should be mounted to a wall or ceiling only as 

recommended by the manufacturer.

23. Heat

 - The product should be situated away from heat sources such as radiators, heat 

registers, stoves or  other products (including amplifiers) that  produce heat.

Precautions

Safety Information  

CAUTION:

1. DO NOT  REMOVE THE  PROTECTIVE HOUSING.
2. USE OF CONTROLS AND  ADJUSTMENTS OR PERFORMANCE OF PROCEDURES 
OTHER THAN  THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION 
EXPOSURE.
3. IF THIS PRODUCT DEVELOPS TROUBLE, CONTACT A QUALIFIED SERVICE CENTER, 
AND DO NOT  USE THE  PRODUCT IN  A  DEFECTIVE STATE.

Safety Precautions

The lightning flash with arrowhead symbol, within an equilateral triangle, is 
intended to alert user to the presence of uninsulated "dangerous voltage" 
within the product's enclosure that may be of sufficient magnitude to 
constitute risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert user to 
the presence of important operating and maintenance(servicing)instructions 
in the literature  accompanying the appliance.

Содержание RCD836









Отзывы: