DISC PLAY
Insert a CD as described in the previous section and close the disc compartment. The display will then
show the total number of tracks and total playtime.
Press the button. Disc play will begin from the start of the first track of the disc. A particular track can
be selected using either of the CD SKIP buttons . If this is done before pressing the button, disc play
will start with the selected track when the button is pressed.At the end of the disc, the unit will switch
to stop mode.
Notes:
If the disc is deeply scratched, or too dirty, disc play may not start. If an improperly centered disc is
played, noise can be heard in the mechanism. The use of such discs should be avoided.
If the disc is inserted incorrectly, or the disc is damaged the display will show No disc
DISC ERRORS
This compact disc player has built-in error compensation circuits to correct for minor defects in a disc.
There are limits, however, to the amount of correction available.
In some cases, the CD player may skip some tracks, or parts of tracks, on a disc during disc play. This
problem may be caused by defects (such as scratches) in the disc being played, which are too large for
the error compensation circuits to handle.If you encounter this problem, check the CD player's operation
as follows, before having the unit serviced:
Play a new disc. If the CD player operates normally, the skipping problem is probably due to a defective
disc.
TO STOP A CD PART WAY THROUGH
Press the Stop button. Disc play will stop, and the display will show the total number of tracks.
To temporarily stop disc play (pause mode), press the button. Disc play will stop at the current play
position. The track playing time will flash .
To resume disc play, press the button again.
TRACK SKIP
STARTING DISC PLAY FROM THE BEGINNING OF A PARTICULAR TRACK
Press the SKIP or TRACK buttons to select the desired track. The number of the selected track
will be shown on the CD display. Press the button to start play.
TO SKIP TO THE NEXT TRACK
For example, to skip ahead to the beginning of track 5 while track 4 is playing. . Press the SKIP
TRACK button once. Disc play will resume at the beginning of track 5. The CD player will skip ahead
to the next track each time the SKIP TRACK button is pressed.Repeatedly pressing the SKIP
TRACK button makes the CD player skip ahead through the disc track by track. Once the beginning of
the last track is reached the CD player advance to the first track.
Содержание RCD744
Страница 1: ...INSTRUCTION MANUAL...
Страница 6: ...AM LOOP ANTENNA INDICATION...