background image

  

If necessary, clean the unit with a piece of cloth dampened with water only (Be sure the AC 

Power Cord is disconnected from the Mains). Never use a polish or a strong detergent, as this 

will damage the finish of the cabinet.

This equipment has been designed and manufactured to meet the highest international 

standards, but, like any electrical apparatus, which is operated at mains voltage, care must be 

taken if you are to obtain the best results and safety is to be assured. This is particularly 

important with audio equipment.

DO . . . 

read the operating instructions before you attempt to use the equipment.

DO . . . 

ensure that all electrical connections (including the mains plug, extension leads and 

interconnections between pieces of equipment) are properly made and in accordance with the 

manufacturer's instructions. Check that the mains fuse rating is

 

correct.

DO . . .

 always consult your dealer if you are ever in doubt about the installation, operation or 

safety of your equipment. He is the best person to advise you.

DO NOT...   

obstruct the necessary all-round ventilation - especially DON'T stand the set 

close to curtains or on soft furnishing such as carpets. Overheating can cause

 

unnecessary 

damage and shorten the life of the set.

Remember that to obtain the best performance and lasting satisfaction from your equipment, 

have it regularly maintained by a reliable service organization. Ensure that all the family 

correctly uses it. ABOVE ALL: Never let children push anything into holes or slots in the case 

- this could result in an electric shock; Meyer guess or take chances with electrical equipment 

of any kind - it is better to be safe than sorry!

This removes particles of the metal .

HEAD CLEANING

oxide coating that wear off the tape and accumulate on these parts and impair performance. 

Switch off the power, press the Stop/Eject button to open the cassette door, and press the 

Play button. Clean the tape heads, pinch roller and capstan with a soft cloth or cotton bud 

dampened in iso-propylalcohol or special tape head cleaner.

PREVENTION OF ACCIDENTAL ERASURE

To prevent a recording on a cassette tape being erased accidentally, break off the tab on the 

rear of the tape, as in the diagram. Now recording on this side is no longer possible. You can 

render this protection ineffective by covering the hole with a piece of adhesive tape

MAINTENANCE AND CARE

Electronic products of this kind should never be subjected to extreme temperatures or high 

humidity. For instance, this set should not be placed in bathing areas or around stoves and 

radiators.

  Keep this unit away from radiators and other heat sources.

  Keep this unit away from naked flame source, such as lighted candle.

  Do not expose this unit to dropping or splashing and no objects filled with liquid, such as

  vase, shall be placed on it the apparatus.     

15

Содержание RCD725


















Отзывы: