OPERATING INSTRUCTIONS
OI51
Brewing Instructions
The G4 GEMX Intellifresh brewer is factory preset for optimal performance.
((&.94*'5((&.95*'501&3"5*/(*/4536$5*0/4ø
C
Place an empty IntelliFresh
satellite under the brew
basket. Make sure the
satellite is pushed all the way
back against the front cover
and is making contact with
the electrical socket.
3
*OTFSUBDMFBOQBQFSmMUFS
into the brew basket. Fill with
the proper amount of ground
coffee. Level the coffee in the
mMUFS
4
4MJEFUIFmMMFECSFXCBTLFU
into the brew rails under the
control panel. Slide it all the
way back until it stops.
)PMEZPVSmOHFSPOUIF
appropriate brew icon. As
soon as you hear the click
of the brew valve, lift your
mOHFS#SFXJOHXJMMCFHJO
The brewer will brew coffee based on the settings programmed into the universal control module (UCM). To
change the settings, see the
PROGRAMMING GUIDE
section.
The brewer should be ON.
$POmSNUIJTBUUIFSFBSUPHHMF
switch. “Ready to brew”
should be on the display.
WARNING
- TO AVOID SCALDING, AVOID SPLASHING.
Keep body parts clear of the brewer during
CSFXJOH%POPUSFNPWFUIFCSFXCBTLFUXIJMFi#SFXJOHwBQQFBSTPOUIFEJTQMBZ
NOTICE
-
Only use GEM3XIFT IntelliFresh
®
satellites on GEMX™ series IntelliFresh brewers.
6 If a keypad appears on
the display, the brew code
feature is enabled (default
is off).
Brewing will start
immediately after you enter
the brew code
. See the
PROGRAMMING GUIDE
to
set up/disable the brew code.
