Install the Hold Down Brackets
The water tower must be secured to the bottom of the
DBCJOFUVTJOHUIFIPMEEPXOCSBDLFUTBGmYFEUPUIFCPUUPN
edges of the chassis.
27
'BTUFOUIFXBUFSUPXFSCSBDLFUTPOUPUIFnPPS5IFSF
is one on the front and one on the side. If the brewer is
installed in a different location later, these brackets must
also be moved and installed with the water tower.
Install the Exhaust Lines
24
5IFXBUFSUPXFSJTFRVJQQFEXJUIUXPPVUMFUmUUJOHTUIBU
vent steam and condensation from the water tank inside
UIFDIBTTJT3VOUIFQSPWJEFEFYIBVTUMJOFUVCJOHGSPN
UIFTFmUUJOHTUPBESBJOUPESBJOPGGDPOEFOTBUJPO
NOTICE:
5IFFYIBVTUMJOFUVCJOHNVTUCFJOTUBMMFE
so that ends do not become submerged in water to
avoid backup.
INSTALLATION INSTRUCTIONS
II12
SERA2, INSTALLATION INSTRUCTIONS
111617A
Figure 14 - Exhaust Line Installation
Figure 15 - Water Supply Connection
Exhaust lines
attached to tank
RYHUÀRZ¿WWLQJV
Do not submerge
end of tubing in
water
Connect the Water Supply
25 Flush the water supply line prior to installation to purge
BJSBOEEFCSJTGSPNUIFXBUFSmMUFSBOEUVCJOH
26
$POOFDUUIFXBUFSTVQQMZMJOFUPUIFnBSFmUUJOHPOUIF
back of the brewer. Leave the water supply valve closed
until the power is connected.
WARNING:
Failure to install the hold down brackets
may cause the unit to tip over, especially when
installed in a mobile coffee counter. Injury might
result from spilled hot liquids or damage may occur
to the water tower itself.
