Curtis G3 ThermoPro Series, Руководство пользователя

Страница: 19 / 43

PROGRAMMING GUIDE PG2
8$130(3"..*/((6*%&ø H
Non-Brew Programming Menu (cont.)
Display Brew Time - turns the display of the brew time during brewing On or Off. The factory default setting is
On. Once accessed, press
Ż
or
Ź
to choose the desired setting, then press
~
to exit.
Display Messages - turns display of the message “Rinse Server Before Brewing” On or Off The factory default
setting is On. Once accessed, press Ż or Ź to choose the desired setting, then press
~
to exit.
[QT] Display Timers [On/Off] - (some models, QT Alarm must be on) turns the quality timer countdown
display On or Off. The factory default setting is Off. Once accessed, press Ż or Ź to choose the desired
setting. Then, press
~
to exit.
QT Alarm On/Off - (Gemini models) turns the quality timer audio alarm On or Off. The factory default setting
is On for GEMS/GEMT models, Off for GEMIF and GEMX models. An audible alarm goes off when the quality
timer has expired. Once accessed, press
Ż or Ź to choose the desired setting. Then, press
~
to exit.
Satellite Color - (GEMX series models only) changes the color scheme of the quality timer LEDs on the
dispenser (satellite). Once accessed, press
Ż
or
Ź
to choose the desired color to indicate “fresh” (On). Press
~
to save, then press
Ż
or
Ź
to choose the desired color to indicate “expired”. Press
~
to save and exit.
Server Lockout - (GEMX series models only) turns the lockout feature On or Off. The factory default setting
JT0GG8IFOTFUUP0OUIF#3&8CVUUPOJTEJTBCMFEXIFOUIFSFJTnVJEJOUIFEJTQFOTFSQSPWJEFEUIBUBO*3
equipped dispenser is in use (LOCKED appears on the display). Once accessed, press Ż or Ź to choose the
desired setting. Press
~
to save and exit.
Brew Button Programming Menu
8IFOZPVmSTUFOUFSUIF#SFX#VUUPO1SPHSBNNJOHNFOVZPVXJMMCFBTLFEUPTFMFDU QSFTTB#3&8CVUUPOUP
DIBOHFUIFTFUUJOHTGPS5PQSPHSBNNPSFUIBOPOF#3&8CVUUPOmOJTIQSPHSBNNJOHUIFmSTUUIFOQSFTT
Ź
until
Exit appears on the display. Press
~
to exit, then re-enter the Brew Button Program to program the next one. The
default brew settings assume that the amber AFS spray head is installed.
Brew by Volume - BEKVTUTUIFWPMVNFCSFXFE5IFGBDUPSZEFGBVMUTFUUJOHTBSF-"3(&P[œP[-
œNM .&%*6.P[œP[-œNM 4."--P[œP[-œNM8JUIBEJTQFOTFSJO
place, press the BREW button that is illuminated. When the desired volume is reached, press the same BREW
button again to stop the brew cycle and set the volume.
* Not applicable to TP1 series.
** This is the LARGE setting for TP1 series brewers.
continued...
Select
~
Select
~
Select
~
Select
~
Select Button...
<-- Select -->
Press BREW
Brew Button Prog
<-- Select -->
Pulse Brew
<-- Select -->
Brew by Time
<-- Select -->
Press
~
Exit
<-- Select -->
Pre-Infusion
<-- Select -->
Pulse Brew
<-- Select -->
Brew by Volume
<-- Select -->
Bypass On/Off
<-- Select -->
Press
~