Programming Options
4FFUIFmSTUQBHFPGUIFQSPHSBNNJOHHVJEFGPSJOTUSVDUJPOTPOBDDFTTJOHFBDIJOEJWJEVBMNFOVJUFN
Some menus save and exit automatically when a parameter is updated. Other menus exit to the previous menu
when a parameter is saved. To exit, press
Ź
until EXIT appears on the display, then press
~
.
Brew by Volume -
BEKVTUTUIFWPMVNFCSFXFE UIFGBDUPSZEFGBVMUJTP[ -8JUIBOFNQUZBJSQPUJO
place, press the appropriate BREW button. When the desired volume is reached, press the same BREW
button again to stop the brew cycle and set the volume.
Brew by Time -
adjusts the amount of coffee brewed by time rather than by volume (the factory default is
NJOTFD0ODFBDDFTTFEQSFTT
Ż
or
Ź
VOUJMUIFOVNCFSPGNJOVUFTJTnBTIJOH5IFOQSFTT
~
repeatedly
to change the number value. Press
Ż
or
Ź
VOUJMUIFOVNCFSPGTFDPOETJTnBTIJOH5IFOQSFTT
~
repeatedly
to change the number value. Press
Ż
or
Ź
VOUJMiFYwJTnBTIJOHUIFOQSFTT
~
to exit.
Temperature -
TFUTUIFCSFXJOHUFNQFSBUVSFPGUIFXBUFSIFMEJOUIFXBUFSUBOL UIFGBDUPSZEFGBVMUJT'
5IFSBOHFJT'UP'0ODFBDDFTTFEQSFTT
Ż
or
Ź
to choose the desired temperature. Then press
~
to set and exit.
Energy Save Mode -
saves energy during periods when the brewer is not in use (the factory default is
0''8IFOTFUUP0/UIFCSFXFSBVUPNBUJDBMMZTIVUTPGGUXPIPVSTBGUFSUIFMBTUCSFXDZDMF1SFTTUIF0/
0''CVUUPOUPSFUVSOUPOPSNBMPQFSBUJPO8IFOTFUUP0/'UIFCSFXFSTIVUTPGGUXPIPVSTBGUFSUIFMBTU
CSFXDZDMFCVUUIFXBUFSUBOLUFNQFSBUVSFSFNBJOTBU'6TFUIF0/'TFUUJOHUPSFBDICSFXJOH
temperature faster after periods of non-use. Once accessed, press
Ż
or
Ź
to choose the desired setting.
Then press
~
to set and exit.
Brew Count Odom -
When accessed, this feature displays the total brew cycles since the odometer was last
reset. Press
Ż
to exit or
~
reset and exit.
Pre-Infusion -
sets the brewer Pre-Infusion time (Pulse Brew must be off to access, the factory default is
%JTBCMFE1SF*OGVTJPOJODSFBTFTDPOUSPMPGDPGGFFDMBSJUZBOEFYUSBDUJPO8IFOUVSOFEPOUIFSBOHFJTUP
seconds. Once accessed, press
Ż
or
Ź
to choose the desired setting, then, press
~
to exit. To turn off pulse
CSFXNPEFDIPPTFGPSUIFUJNF
When Pre-infusion is ON, Pulse Brew disappears from the list of menu items.
Brew Count Total -
when accessed, displays the total brew cycles on the brewer. It cannot be reset. The
display returns to the previous screen automatically after a few seconds.
Cold Brew Lock -
adjusts the temperature at which the brewer will brew coffee when the BREW button is
pressed (
Ready to Brew
BQQFBSTPOUIFEJTQMBZUIFGBDUPSZEFGBVMUJT'5IJTGFBUVSFBMTPBEKVTUTUIF
UFNQFSBUVSFBUXIJDIUIFIFBUJOHFMFNFOUUVSOTPOUPSFIFBUUIFXBUFSJOUIFUBOL5IFBWBJMBCMFTFUUJOHT
BSF¡'¡'BOE0''0''JTXJUIJO¡'CFMPXUIFUFNQFSBUVSFTFUUJOH0ODFBDDFTTFEQSFTT
Ż
or
Ź
to
choose the desired setting. Then press
~
to set and exit.
Master Reset -
SFTFUTUIFCSFXFSVOJWFSTBMDPOUSPMNPEVMF 6$.UPUIFGBDUPSZEFGBVMUTFUUJOHT0ODF
accessed, “Are You Sure?” will appear on the display. Press
Ż
for Yes or
Ź
for No.
Service Call -
sets the service phone number that appears on the display when the UCM detects a SENSOR
ERROR or WATER ERROR . Once accessed, press
Ż
or
Ź
to choose the number to be changed. Then press
~
repeatedly to change the number value. Press
Ż
or
Ź
to choose the next number to change or choose exit
and press
~
.
PROGRAMMING GUIDE
PG8
8$8$130(3"..*/((6*%&ø
"
