8
3.
Connect the AUDIO OUT connector located on your other AV input to an
AUDIO 2 input on your slave unit.
4.
Slide the Power Off / AV1 / AV2 button to AV2. The slave unit will play the input
signal of your AV input.
Note:
If no single input, the screen of the slave unit will display
“
NO VIDEO SIGNAL
”
, and
then changed into blue screen. The slave unit will turn off automatically after a few
minutes.
When playback normally, please do not remove the connective cables, otherwise will
influence normal playback.
Standby Indicator
If you power on the slave dvd and no signal input ,the indicator will be highlighted.
Volume control
Adjust the volume accorfing to your request.
Headphone out
Connect the supplied headphones to the headphone output
located on the right side
of the unit.
Make sure the volume level is set to its minimum setting before connecting the
headphones.
Содержание DVD8722
Страница 1: ......
