CAB INSTALLATION
20 of 30
10.4
Install the upper portion of the rubber filler along
the bottom edge of the rear panel to locate it and
then secure under the seat and along the sides.
10.5
The back ends of the rubber filler should be pulled
out under the cab so that they can be velcroed to
the fenders behind the cab.
10.6
Use the rubber filler as a guide and apply
adhesive Velcro to the tractor fenders behind the
cab.
Step 11: (Final Installation)
11.1
Re
-
install doors and install gas shocks. The end
with the red tab should be attached to the
sideframe of the vehicle.
11.2
Re
-
install the front hinged cover if working on a
60”
mower.
11.3
If working on a
72”
mower, inspect along the
floormat across the entire front of the vehicle and
apply a bead of black silicone to fill any gaps that
may occur.
11.4
Re
-
install battery cover.
Fig. 11.1 (Attach Gas Shock)
Fig. 10.4 (Filler Location)
Rubber Filler
Fig. 10.5 (Filler Location)
Rubber
Extends out