Curtis Dyna-Fog 2742, Руководство пользователя

Страница: 40 / 84

GEAR PUMPING SYSTEM
TOGGLE SWITCH FUNCTIONS
1) Machine switch off: R12 V DC system power and grounds engine
ignition to kill engine.
Machine switch on: A12 V DC system power and removes ground
from engine ignition. This position also applies power to
machine L.E.D. light indicating power is on.
2) Start: Applies system power to starter solenoid to start engine.
3)
Mode Spray: In spray position, a 12 V DC system sends power
to 3-way valve mounted on the blower/engine base plate to
connect Formulation Tank, and power to Spray Light.
Mode Flush : ln flush position, removes power from3-way valve, opens
port to Flush Tank, and applies power to Flush Light.
4) Output on: A10 V DC power to pump motor-control module,
output L.E.D. light and opens the 3-way valve mounted
on the nozzle boom.
Output off: Removes power to pump motor-control module turning
output L.E.D. light off and closes 3-way valve on nozzle
boom.
SELECTOR SWITCH FUNCTIONS
SWITCH
POSITION FUNCTION
F Connects fuel level readout (Optional) to digital meter
and locates decimal point one place from right. Voltage of 7.5
millivolts correspond to 7.5 gallons.
1 Connects low rate readout in ounces/minute to digital meter and
located decimal point 2 places from right. Voltage of 18.0 millivolts
corresponds to 1.80 oz/min.
2 Connects high rate readout in ounces/minute to digital meter and
located decimal point 2 places from right. Voltage of 180.0 millivolts
corresponds to 18.00 oz/min.
40