curt 12142, Инструкция по установке, Страница: 3 / 5

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
3. Clear away caulk as necessary near mounting holes on
both sides using a knife.
4. Fishwire (1) 1/2" carriage bolts and (1) CM-SP10 into the
forwardmost holes on the outside of each frame rail.
Reverse Fishwire (1) 1/2" carriage bolts and (1) CM-SP10
into the rearmost hole on the bottom of each frame rail
leaving the fasteners in the fram until hitch is in position.
Keep wires attached until hitch is raised into position.
6. Torque all 1/2" hardware to 110 ft.-lbs.
NOTE: For applications with a factory tow hook, torque factory
M14 hardware to 135 ft.-lbs.
5. Raise hitch into position, threading the fishwires into the
mounting holes. Remove fishwire and loosely install 1/2"
Hex Flange Nuts.
NOTE: For applications with a factory tow hook, loosely install
factory M14 hardware.