INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
5. Raise the hitch into position, thread the fishwires into the
mounting holes, and loosely install the 1/2" hex flange nuts
with a 3/4" socket.
Note:
For applications with a factory tow hook, loosely install
factory M14 hardware.
6. Torque all 1/2" hardware to 110 ft.-lbs.
Note:
For applications with a factory tow hook, torque factory
M14 hardware to 135 ft.-lbs.
4. Fishwire (2) 1/2" carriage bolts and CM-SP10's into the
forwardmost holes on the outside of each frame rail.
Reverse Fishwire (2) 1/2" carriage bolts and CM-SP10's
into the rearmost hole on the bottom of each frame rail.
Keep wires attached until hitch is raised into position.
3. Clear away caulk as necessary near mounting holes using
a knife. On the passenger side, remove (2) plastic screws
retaining an access panel located in the wheel well using an
offset phillips screwdriver.
Содержание 13231
Страница 4: ......
