NEED ASSISTANCE?
•
844.278.4357
•
RA
•
PAGE 4
Step 7
At this time, adjust the running board
to the desired location.
With the running board in position,
it is recommended to tighten all
brackets to the vehicle first, followed
by the running board connections.
Repeat steps 1 through 7
on the passenger side.
Step 8
Remove the fuse from the wiring
harness before installing.
Once the fuse is removed, take that section
of the wiring harness and attach it to the
battery. Route the opposite end of the harness
through the firewall into the cab of the vehicle.
Zip-tie the wiring harness in place
once it is in the desired location.