Currier Tech IZIP Скачать руководство пользователя

Страница: 64 / 77

Cross-Country, Marathon, Hardtails

Intended use of your electric bicycle

Cross-Country, Marathon, Hardtails

Cross-Country, Marathon, Hardtails

Condition 3

Bikes designed for riding Conditions 1 and 2, plus rough trails, small

obstacles, and smooth technical areas, including areas where momen-
tary loss of tire contact with the ground may occur. NOT jumping. All
mountain bikes without rear suspension are Condition 3, and so are
some lightweight rear suspension models.

INTENDED

For cross-country riding and racing which ranges from

mild to aggressive over intermediate terrain (e.g., hilly with small obsta-
cles like roots, rocks, loose surfaces and hard pack and depressions).

Cross-country and marathon equipment (tires, shocks, frames, drive trains) are light-

weight, favoring nimble speed over brute force. Suspension travel is relatively short
since the bike is intended to move quickly on the ground.

NOT INTENDED

For Hardcore Freeriding, Extreme Downhill, Dirt Jumping, Slope-

style, or very aggressive or extreme riding. No spending time in the air landing hard
and hammering through obstacles.

TRADE OFF:

Cross-Country bikes are lighter, faster to ride uphill, and more nimble

than All-Mountain bikes. Cross-Country and Marathon bikes trade off some ruggedness
for pedaling effi ciency and uphill speed.

Содержание IZIP














































































Результаты поиска

Содержание IZIP

Отзывы:

Похожие инструкции для IZIP

Бренды по названию

Популярные бренды

Currier Tech IZIP, Руководство пользователя

Результаты поиска

Содержание IZIP

Отзывы:

Похожие инструкции для IZIP

Бренды по названию

Популярные бренды