Currier Tech e4.5 eZip, Руководство пользователя

Страница: 7 / 30

7
2. Install the seat mast into the frame. The mast should go all the way down to the base of the scooter, as shown in
photo 2a. You may need to twist the mast to work it into position. With the mast fully inserted, twist the saddle so it is
facing forward, parallel to the scooter, then tighten the binder bolt as show in photo 2b. When the binder bolt is properly
tightened, the seat mast will not be able to twist out of position or pull out of the scooter.
2a 2b
3. Before riding for the first time, you should check the tightness of all nuts and bolts on the scooter. Most important are
the front wheel axle nuts, any nuts or bolts around the rear brake, the motor, and the rear wheel. Make sure the brake
levers and throttle are secure on the handlebars. If they can be twisted out of alignment, their mounting bolts need to be
tightened.