manualshive.com logo in svg

Currier Tech e4.5 eZip, Руководство пользователя

Поделиться
Скачать
Currier Tech e4.5 eZip Скачать руководство пользователя страница 24

24

e4.5 Owner's Manual.indd, Last Modified: December 28, 2012 10:49 AM

 TRoUBLeSHooTIng

Scooter will not function

 

• Charge battery for the full recommended time (4-6 hours)

 

• Check connections to the scooter controller, located under the deck near the battery.

Scooter suddenly stops working during use

 

• Check fuse, located near the controller inside the battery compartment. If the fuse has burned out,  

 

replace it with a standard automotive fuse of the indicated amperage.

Scooter only runs for a short amount of time

 

• Your battery may have aged past its useful life. See the Battery Care section of this manual for more  

 

information

 

• The rear brake may be rubbing, forcing the motor to work much harder than normal to propel the  

 

scooter. See the section of this manual discussing brake adjustment for more information.

Scooter makes grinding noises under power

 

• Check that the chain is not rubbing the scooter frame or chainguard.

 

• Lubricate the chain (see Maintenance section)

 

 

After owning the scooter for a while, the brake lever becomes stiff and difficult to operate

 

• See instructions on page 22 for help cleaning or replacing your brake cable.

For instructions on more advanced troubleshooting, please call our customer service department in California at 

800-377-4532

Содержание e4.5 eZip































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды