manualshive.com logo in svg

Currier Tech 1000 DD Series, Руководство пользователя

Поделиться
Скачать
Currier Tech 1000 DD Series Скачать руководство пользователя страница 30

30

Customer Service 1-800-377-4532

Currie Technologies

®

WARNING

!

FRONT AND REAR WHEEL

500DD, 750DD AND 1000DD SERIES 

SCOOTERS

Do not use a flat 

screwdriver or other sharp metal tool 
to remove the tire from the rim as this 
may cause damage to the rim, inner 
tube and/or tire.

To remove the front wheel refer 

1. 

to page 23 then proceed to step 
3.
To remove the rear wheel refer 

2. 

to pages 24 then proceed to 
step 3.
With a bicycle tire lever unseat 

3. 

one side of the tire from the rim. 
(Ref Photo A, B, C)
Remove the tube from the tire.

4. 

Slightly inflate the tube in 

5. 

order to inspect for leaks or 
punctures. Patch or replace the 
tube as necessary.
Carefully check the inside of 

6. 

the tire and remove any sharp 
objects or debris that caused 
the puncture. If the tire is cut 
through in any place replace it
To reassemble the front wheel, 

7. 

first slightly inflate the tube to 
allow it to take shape then install into the tire.
Insert the valve thru the hole in the rim.

8. 

Push (by hand only) one side of the tire and tube all the way over and 

9. 

onto the rim.
With a bicycle tire lever seat the other side of the tire onto the rim. Be 

10. 

sure not the pinch (tube puncture caused by being caught between the 
tire and rim) the tube.
Inflate the tire slowly to the recommended tire pressure. Inspect the 

11. 

tire during inflation to ensure it is seating onto the rim properly.

Photo A

Photo C

Photo B

Direct Drive Scooters.indd   30

Direct Drive Scooters.indd   30

6/2/2008   1:54:46 PM

6/2/2008   1:54:46 PM

Содержание 1000 DD Series





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды