18
Customer Service 1-800-377-4532
Currie Technologies
®
THROTTLE AND BRAKE OPERATION & ADJUSTMENT
THROTTLE OPERATION
The speed of the Electro-Drive™
scooter is controlled by a grip-
twist throttle, which is located on
the handlebar.
To check the throttle operation,
turn the power switch to the
“OFF” position. Fully twist the
throttle then quickly release it.
The throttle is spring loaded and
should immediately spring back to
its original (also know as “Zero Position) position.
To accelerate, twist the right hand throttle grip towards you as you stand
on the deck plate. The more you twist the throttle, the faster the motor will
propel the scooter until you reach the scooter’s top speed.
To go slower, or coast to a slower speed, allow the throttle to spring back to
its original position. To decelerate or come to a complete stop, release the
throttle and allow it to return automatically to its original position. Then squeeze
the brake lever(s) to activate the brake(s). Remember to release the throttle
whenever you apply the brake.
The throttle and its components are fully assembled and
tested at the factory. Do not attempt to adjust them at
any time. If you feel the throttle and/or components are in
need of service DO NOT RIDE THE SCOOTER! Contact
Currie Technologies
®
Customer Service number at
1-800-377-4532.
If you do not fully understand how to operate your scooter
throttle properly, DO NOT RIDE YOUR SCOOTER.
Contact Currie Technologies Customer Service for
information and instructions at 1-800-377-4532.
WARNING
!
WARNING
!
Direct Drive Scooters.indd 18
Direct Drive Scooters.indd 18
6/2/2008 1:54:12 PM
6/2/2008 1:54:12 PM
