16
2. Set the First Position- Full Closed Down
Twist the E-Wand TWIST HANDLE [Fig.
4.2] to move the slats of the blind to the
FULL DOWN position, then release the
TWIST HANDLE.
Be careful not to over tighten slats, as
over tightening can cause damage to
the blind.
Figure 4.2; Twist
Blinds to Full
Closed
Figure 4.3;
Push and Hold
Programming
Button
Press and hold the PROGRAMMING
BUTTON until you hear a SINGLE BEEP
(1) [Fig. 4.3], then release.
