Current Solutions InTENSity Select Combo, Инструкция по эксплуатации, Страница: 35 / 44

TENSPros
To use these electrodes:
1) Attach the electrode to the lead wire.
2) Remove the protective backing from the electrode surface.
Do not throw away the protective backing because it is
reused after the treatment session has been completed.
3) Place the tacky surface to the prescribed skin area by pressing
the electrode firmly against the skin.
To remove your electrodes:
1) Lift the corner of the electrode and gently remove it from the
skin.
2) It may be helpful to improve repeated application by
spreading a few drops of cold water over the adhesive and
turn the surface up to air dry. Over Saturation with water
will reduce the adhesive properties.
3) Between uses, store the electrodes in the resealable bag in a
cool dry place.
Caution:
1)
2)
3)
Do not pull on the electrode wire. Doing so may damage
the wire and electrode.
Do not apply to broken skin.
4)
5)
6)
The electrodes should be discarded when they are no
longer adhering.
The electrodes are intended for single patient use only.
If irritation occurs, discontinue use and consult your
clinician.
Read the instructions for use of self-adhesive electrodes
before application.
35