Current Solutions InTENSity Select Combo, Инструкция по эксплуатации, Страница: 28 / 44

TENSPros
4.7.2 EMS Setting
Press the [S] button cycle to enter the setting state. The settings
can be adjusted according to the following steps:
1) Set the Therapeutic Program
There are 3 programs in EMS therapeutic
mode available – Synchronous, Alternate and
Delay. The therapeutic program can be
selected by pressing the [ ▲ ] and [ ▼ ] button.
When you choose to [S] program, program [S]
outside of the box will be flashing.
2) Set Timer
Press [S] button cycle to enter this setting. The treatment time is
adjustable from 1 to 60 minutes or Continuous. Press [ ▲ ] or [ ▼ ]
control to adjust setting. You can set the timer to “Continuous”
mode by pressing the [ ▲ ] button when it shows 60 minutes. The
output will be shut off when time is up.
3) Set Pulse Width
The pulse width determines the length of time. Each electrical
signal is applied through the skin, which controls the strength and
sensation of the stimulation. Press [S] button cycle to enter this
setting. The pulse width is adjustable from 50 to 300 uS.
Press [ ▲ ] or [ ▼ ] button to adjust the setting.
4) Set Pulse Rate
The pulse rate determines how many electrical impulses are
applied through the skin each second. Press [S] button cycle to
enter this menu. Adjust the setting by pressing the [ ▲ ] or [ ▼ ]
buttons. The pulse rate is adjustable from 1 Hz to 150 Hz.
5) Set Delay Time (Optional)
Delay time is adjustable form 1 to 10 seconds.
Only the “Delay” therapeutic program has this
button cycle to
the [ ▲ ] and [ ▼]
button to adjusting the setting.
6) Set Ramp Time
The ramp time controls the time of output current that increase from
parameter setting. Press [S]
enter this menu, and then press