Name | model
Curly’s Ag –
Agricultural Innovations | www.curlysag.com | [email protected]
Hand-E | MODEL V2022
P a g e |
7
Tines
1.
Insert the tines
(E)
into the slots (your choice as to the spacing you
require). Making sure they are all the way in so the small recess fits down
onto the base plate. (you may need to gently tapp the tine head to get it to
seat properly). See Figues 3-5
2.
Take the M6x12 nuts and bolts
(D)
and insert them into the tines on the
back side using the pre drilled holes. These also need to be done up tight
using a spanner. See figures 6 and 7
3.
End product should look like this, depending on the size of tines and the
spacing you have set.
E
Figure 3
Figure 4
Figure 5
E
Figure 6
Figure 7
D
D
