EN
16
WALL MOUNTING
1.
Put the foot pads on bottom ends of the vertical tubes.
2.
Put the wall brackets on the rails and mark out the screw holes.
3.
Drill the holes and insert the plugs.
4.
Screw on the wall brackets.
5.
Put the towel rail on the brackets and attach the outer parts of the wall brackets.
USE
The towel rail is intended to be used in bathrooms and laundries etc. to dry wet textiles.
1.
Plug the towel rail’s plug into a power point.
2.
Start the towel rail by setting the power switch in the ON position (1) (the status lamp goes on).
3.
Switch off the towel rail by setting the power switch in the OFF position (0)
(the status lamp goes off).
4.
Unplug the plug from the power point after use.
5
6
7
5. Foot pad
6. Wall bracket
7. Plug
