EN
18
Timer
Press the button
to set the timer from two
or four hours.
NOTE:
Switch off the towel rail and pull out the plug
when it is not in use.
SWITCHBOX
1. Fit the switchbox at the bottom on the
right side of the towel rail, as shown in
the diagram.
FIG. 3
2. Remove the side cover.
FIG. 4
3. Pull the power cord through the bottom
of the switchbox, leaving a suitable length
sticking out.
FIG. 5
4. Screw the switchbox firmly onto the
vertical tube on the towel rail.
FIG. 6
Terminals
1. Put the terminal block in the switchbox
and check the markings.
2. Connect the neutral, live and
wires
on the power cord to the corresponding
terminals.
3. Replace the cover and screw tight.
4. Fit the cover plate on the back to conceal
the power cord.
FIG. 7
WARNING!
The installation must be carried out by an
electrician or other qualified personnel to
ensure safe use.
USE
HOW TO USE
Power switch
Press the switch
to start the towel rail. Press
once again to switch off.
