9
Ed. 0121 - 70702580 REV01 Silea - Pre-installation
20
K
20K
H
2
O
min.
500 mm
(
in. 19,7
)
20K
Fig. 4
Fig. 5
Fig. 6
Transport
Fig. 4
Fitted with personal protection equipment, transport the
appliance to the installation location.
Use suitable equipment, capable of dealing with its weight:
persons not involved with the appliance installation may not
pass through or stand in the work area during the appliance
assembly.
During the transport, pay particular attention to passing
through openings and/or doors.
Preliminary operations
Fig. 5
Carefully remove the protective film.
If any glue residue is left on the surfaces, remove it with soapy
water but without any corrosive or abrasive products or sharp
or pointed instruments.
Check that all the parts making up the product are in
good condition and without any faults or breakages, if
that is not the case, contact the Dealer for the
procedures to follow.
Positioning
Fig. 6
Install the appliance in a room:
•
dedicated and suitable to the cooking of food;
•
having adequate air ventilation;
•
containing no flammable or explosive elements;
•
that complies with the current regulations on health and
safety and systems in your country;
•
is protected from the weather;
•
has a maximum temperature of b5° (41°F) and
+35°C (95°F);
•
has a maximum humidity of 70%.
Installation
To reduce the risk of a fire,
comply with the stated
minimum distances
and install the appliance in
fireproof
environments that are
not at risk of explosion
.
The floor of the installation room
must have a surface
fireproof
finish too.
