CSG 600 SLIDING GATE OPERATOR USER
’S MANUAL
5. Final Check
⚫
Check the power supply, grounding and wiring before running the device.
⚫
Release the gear clutch with the release key to determine whether or not the gate can
be moved manually. If everything is in good working order, tighten the clutch with the
key.
⚫
Switch on the power and run the device to ensure that the gate is sliding smoothly.
⚫
Adjust the block position until the gate opened and closed properly at the limited
positions.
⚫
The gate operator is installed with a thermal protector, the motor is only designed to
work for less than 15 minutes. If is runs continually for an extended period of time, the
thermal protector will switch off the motor automatically in case of the temperature is
higher than 120
°C and switch on the motor when the temperature is lower than 85°C
±
5
°C.
6. Maintenance
⚫
Keep operator clean at all times.
⚫
Ensure the operator is well earthed, and correctly terminated.
⚫
Regularly grease the wheels and axles to ensure the gate moves smoothly.
