CSG 600 SLIDING GATE OPERATOR USER
’S MANUAL
Fig.2 CSG 600 Gate operator
Conduit
In order to protect the wires, use PVC conduit for wires, conduit must be set into the concrete
when it is poured. Wires within the conduit shall be located or protected so that no damage
can result from contact with any rough or sharp part.
Concrete pad
The base unit of the gate operator requires a concrete pad in order to maintain proper stability.
The concrete pad should be approximately 300mm x 200mm x 200mm deep in order to
provide for adequate operation. The pad should be 70mm above finish grade. Be sure to
locate the pad so that it will not interfere with the gate.
Fig.3
300
mm
250m
m
