info@ cuppaz.com
hotline: 852 2812 0428
5
Protect The Sleek from sprays and drips. Water and electricity together can cause
danger of electrocution.
Only connect The Sleek to power outlets complying with the requirements of the
law. Make sure that the power supply voltage matches the rating shown on the data
plate, located on the bottom of The Sleek.
The surface on which The Sleek is installed must be level, solid, stationary and heat
resistant; the bearing surface must not exceed an angle of 2°. No wobbly surfaces
for The Sleek!
Don
’
t leave The Sleek
’
s power cord near hot surfaces, sharp edges or other sharp
objects that can damage it.
Never place your hands inside the capsule compartment as this can cause injury.
Always close the lever of the Sleek. Never open the lever while a beverage is being
dispensed.
Never remove machine parts, except those indicated in this guide for daily
maintenance.
Don
’
t insert objects into the openings as this could cause electric shocks. Don
’
t
attempt any operation on The Sleek that is not described in this guide. Contact
Cuppaz for support at
or call us at 852 2812 0428.
Don
’
t pull on the power cord to disconnect it. Remove the plug instead to avoid
damaging it.
The Sleek can be used by persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and understand the
hazards involved.