CUOGHI F8030, Руководство пользователя

Страница: 20 / 52

ENGLISH
gb-20
M1051-1
At this point you can access the inside of the machine to perform the required operations.
!
When you open the hood you have to disconnect the ground wire that is located close to the control panel
(see pic. 5) and which is accessible only when the body is tilted a few degrees upwards aft er release.
!
Removing the bodywork gives access to potentially dangerous parts: this operation should only be car-
ried out by qualifi ed personnel (see pic. 5)
Compressor mounting brackets removal
For packaging and transporting the compressor is fi xed to the frame by special brackets which must be removed before oper-
ating the machine.
Pic.6 – Compressor brackets removal
• Straighten the dehumidifi er;
• loosen and remove the two screws V attached posteriorly to the frame;
• remove the front bracket S1;
• remove the bracket S2 positioned behind the compressor.
S
Store the brackets and screws so you can reuse them if you need to move the dehumidifi er.