CUMMINS ALLISON JetScan страница 6 Скачать руководство пользователя

Страница: 6 / 10

JetScan

S T O P P I N G C O N D I T I O N S

JetScan

S T O P P I N G C O N D I T I O N S

Stopping Conditions

and Recovery Steps

The following conditions cause the machine to stop and require action by the user.

D I S P L A Y

JetScan may have processed two or more

notes as one.

Remove all notes from the pocket indicated on the screen and place them

on the hopper. Press

CONT

. If the alarm repeatedly occurs, adjust the gray

thickness adjustment dial located on top of the machine behind the hopper

extension. Rotate in the negative (

) direction as indicated by numbers on

front of the dial.

D I S P L A Y

The machine is operating in the

sort mode and has detected a new

denomination value.

Remove all notes from the pocket indicated on the screen and place them

with other processed notes. JetScan automatically will restart and resume

processing.

D I S P L A Y

The machine has diverted notes

to the wrong pocket.

Remove all notes from the pocket indicated on the screen and place them

in the hopper; press

CONT

. JetScan will revert to the previous note count

before the error occurred with no impact on strap, sub-batch and day counts.

D I S P L A Y

JetScan may have processed

two or more notes as one.

Remove all notes from the pocket

indicated on the screen and put

them on the hopper. Press

CONT

If the alarm repeatedly occurs, adjust the gray thickness adjustment dial

on top of the machine behind the hopper extension. Rotate in the negative

(

) direction as indicated by numbers on front of the dial.

D I S P L A Y

JetScan cannot recognize the denomination

of a note and has stopped. This “No Call”

note is the top note in the pocket indicated

on the screen. This note has not been

included in the count.

Inspect the top note in the pocket indicated on the screen. DO NOT remove

all notes from this pocket.
If the document should be counted, keep the note in the same pocket and

then enter its denomination using the correct

denomination value

key

($1, $5, $10, etc.). JetScan will start, and this note will be added to

the count.
If there is no need to include the no-call note in the current count, remove

it and press

CONT

. JetScan will re-start. The removed document will not

be added to the count.

D I S P L A Y

If the JetScan is configured in

SETUP

to stop on non-faced notes,

it will stop and display “FaCING

ERRoR” when a non-faced note is

processed.

Remove the top note in the pocket indicated on the screen, correct its

facing, and put it back in the same pocket. Then press

CONT

. This will be

added to the appropriate strap, sub-batch, batch and day counts.

Содержание JetScan











Результаты поиска

Содержание JetScan

Отзывы:

Похожие инструкции для JetScan

Бренды по названию

Популярные бренды

CUMMINS ALLISON JetScan, Руководство по эксплуатации

Результаты поиска

Содержание JetScan

Отзывы:

Похожие инструкции для JetScan

Бренды по названию

Популярные бренды