Install and Operate Gas-Fired Equipment Properly
• Gas-fired equipment should be installed by a qualified pipe
fitter and must conform with local codes.
• For Canada: The equipment shall be installed in accordance
with the
Natural Gas and Propane Installation Code, CSA
B149.1
, or the
Propane Storage and Handling Code, CSA
B149.2
, or applicable provincial regulations, which should be
carefully followed in all cases. Authorities having jurisdiction
should be consulted before installations are made.
• For the United States: The equipment shall be installed in
accordance with the
National Fuel Gas Code ANSI Z223.1/
NFPA 54
.
• Check all connections for gas leaks.
• Do not operate heater with door open or panels.
• Do not move or handle heater while it is operating, hot, or
connected to power supply.
• Adequate ventilation is required. Combustion and ventilation
air must not be obstructed.
ST-0068–1
10
PNEG-2091
VariFlame™ Heater
Содержание VariFlame VF-16-ONG
