manualshive.com logo in svg

Cumberland Smart-Flex FLX-4629, Руководство по эксплуатации

Поделиться
Скачать
Cumberland Smart-Flex FLX-4629 Скачать руководство пользователя страница 10

2. Smart-Flex (FLX-4629) Operation Instructions

10

PNEG-1186

 Smart-Flex (FLX-4629) Operation Instructions

Setting the Unit I.D. Number (Only Used with Network Master)

When configuring the Smart-Flex to be used with a Network Master, each Smart-Flex must have a unique 
unit I.D. number in order to communicate properly. There is a maximum of twenty five (25) Smart-Flex 
controls that can be used with each Network Master. The unit I.D. number of each Smart-Flex must fall 
between a range of “0051” and “0075”. “0000” is the default setting and indicates no unit I.D. number.
Be sure to record this I.D. number along with a brief description of its location, for each Smart-Flex, for use 
when programming the Network Master.

To Set the Unit I.D. Number

1. Push both arrow up and arrow down buttons at the same time, then release. Initially the default 

setting of “0000” indicating no unit I.D. number, will be displayed.

2. Use the arrow button up or down to scroll through to the desired unit I.D. number from “0051” 

through “0075”.

3. Once the unit I.D. number is selected, push the 

Set/Clr

 button to save this setting.

4. Record this unit I.D. number along with a brief description of its location for future use when 

programming the Network Master.

5. If a unit I.D. number is set on the Smart-Flex un-intentionally, after 15 minutes, an alarm code of 

“AC14” will be displayed, indicating a communication error. Press the 

Set/Clr

 button to clear this 

alarm code. To disable the unit I.D. number, set to “0000”.

Содержание Smart-Flex FLX-4629































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды