Tabbed Cone Panel Assembly
1. Lay the cone panels (A, B, and C) on the ground as shown.
2. Attach the four (4) cone panels together using the tab and slot connections on the edges of each
panel.
NOTE:
Make sure that all the tabs are on the inside of the cone assembly.
3. Install the bolts and nuts through the holes where the panels overlap, to hold the four (4) cone
panels together.
4. Once four (4) cone panels are assembled stand the assembly up with the large radius (E) side
down.
5. Pull both the ends together to create a heart shape as shown and slide the tabs (F) into the slots.
Figure 3-8
Tabbed cone panel assembly
A
Top panel (12-0575–HH)
D
Drain hole
B
Side panel (12-0574–HH)
E
Large radius
C
Bottom panel (12-0575–HH)
24
PNEG-2054
54" Galvanized Butterfly Panel Fan
