Cumberland PNEG-1096, Инструкция по сборке

Страница: 32 / 78

32
PNEG-1096 Ladder, Safety Cage, & Platforms
2.66 OUTSIDE STIFFENED
LS-4352 Safety Cage
Bell Hoop Half (Red)
LS-4353 Safety Cage
44" Vertical Support
SAFETY CAGE BELL SECTIONS
The safety cage bell section is to be used at the point of termination of the safety cage just
above the rest platforms or the concrete. Fasten the bell safety cage brackets (red) to the ladder
(some field drilling may be necessary at this point.) Attach the special bell safety cage hoop
halves to the bell brackets and attach the vertical supports to the bell hoop halves. The vertical
supports will have to be bent at the flat area to allow for the angle of the bell section.
THE BELL SAFETY CAGE PACKAGE GOES ON THE BOTTOM OF A RUN OF SAFETY CAGE AND TERMINATES
JUST ABOVE THE CONCRETE OR PLATFORM.
REV. 3/25/01