Inlet Bell Assembly
1. Install the inlet bell rest bracket (A) to the bottom panel (C) using 1/4 x 2 in. wood screws (B) or
larger. The wood screws (B) must go through the inlet bell rest bracket (A), bottom panel (C) and
wood frame.
2. Use the 1/4 x 2 in. wood screws (B) to mount the fan housing to the wood frame.
Figure 3-20
Inlet bell rest bracket
A
Inlet bell rest bracket (12-0562)
C
Bottom panel
B
1/4 x 2 in. wood screw (Not provided)
D
54 in. Fan mounting holes
PNEG-1502
54" Galvanized Mega Flow Butterfly Fan
33
