Cumberland 074-11772 Скачать руководство пользователя страница 19

Страница: 19 / 102

Installation

Topics Covered in this Chapter

▪

Installing a loadcell to a tank leg (EDG-122 & 123)

Mounting the Bin Scale Module

Installing a loadcell to a tank leg (EDG-122 & 123)

A loadcell must be installed to each tank leg for an accurate reading.

1. If holes do not exist for the loadcell leg mount (5), field drill three 7/16 in. holes, (A), (B), and (C)

from the bottom of the leg.

2. Remove the hardware from the leg anchor plates (20 and 21) at the bottom of the tank leg (9).

NOTE:

Once the tank is lifted and the weight of the tank is off of the anchor plates, you can remove
them.

3. Install the loadcell leg mount (5) and loadcell back brace (8) to the tank leg (9) using two bolts (10)

and nuts (11).

IMPORTANT:

Make sure the back brace is fully tightened against the tank leg so that the weight of

the tank is supported by the plate and leg mount and not by the bolt threads.

4. Install the bottom bolt using existing 3/8 hardware.

5. After the tank has been lifted install the top bolt and nut (10 & 11).

NOTE:

Top bolt will interfere with the loadcell leg mount (5) until the tank has been lifted.

891–00577

EDGE Bin Scale 3 Wires LC

Содержание 074-11772







































































































Результаты поиска

Содержание 074-11772

Отзывы:

Похожие инструкции для 074-11772

Бренды по названию

Популярные бренды

Cumberland 074-11772, Руководство пользователя

Результаты поиска

Содержание 074-11772

Отзывы:

Похожие инструкции для 074-11772

Бренды по названию

Популярные бренды