©2002 Culligan International Company
FILTER REPLACEMENT
These drinking water systems must be maintained according
to the manufacturer’s instructions, including timely
replacement of filter cartridges. Follow the guidelines below
to determine when the filter cartridge must be replaced in
each system. Refer to Figure 3 for the service sequence.
Preferred™ 150 Filter
The filter cartridge must be replaced after every 750 gallons
or one year of use (whichever comes first), or whenever
there is a change in taste or odor or a noticeable decrease in
flow. 750 gallons of water use is roughly equivalent to using
2 gallons of water daily for one year.
Preferred™ 250 Filter
The filter cartridge must be replaced after every 1000 gallons
or one year of use (whichever comes first), or whenever there
is a change in taste or odor or a noticeable decrease in flow.
1000 gallons of water use is roughly equivalent to using 2-1/2
gallons of water daily for one year.
Preferred™ 350 Filter
The filter cartridge must be replaced after every 300 gallons
or one year of use (whichever comes first), or whenever there
is a change in taste or odor or a noticeable decrease in flow.
300 gallons of water use is roughly equivalent to using 1-1/2
gallons of water daily for six months. Conforms to NSF/ANSI
53 for VOC reduction. See Performance Data Sheet for
individual contaniments and reduction performance.
Replacement Cartridge Part Numbers
Preferred 150 Filter Cartridge
01-0028-68
Preferred 250 Filter Cartridge
01-0028-69
Preferred 350 Filter Cartridge
01-0028-70
Replaceable components and service parts are available
through your local independent Culligan dealer. To learn
the name of your nearest dealer, contact:
Manufactured by:
CULLIGAN INTERNATIONAL COMPANY
One Culligan Parkway
Northbrook, IL 60062
USA
(847) 205-6000
http:\\www.culligan.com
WALL
W
ALL
W
ALL
45°
45°
Illustration A
Right Wall
Mounting
Illustration B
Back Wall
Mounting
Illustration C
Left Wall
Mounting
Figure 2
Figure 3
CARTRIDGE
REMOVAL
1. Shut off water supply.
Open serviced faucet
to relieve pressure.
CARTRIDGE
INSTALLATION
1. Align cartridge lug
with head label.
2. Turn cartridge to the
left as far as possible.
2. Holding head firmly,
press cartridge fully
into head.
3. Holding head firmly,
pull cartridge down-
ward and out of head.
3. Turn cartridge to right
until rotation stops.
4. Turn water on and run
water for 3 minutes to
purge cartridge of air.
45°
Head can
be rotated
a maxi-
mum of
45° from
wall.
