Culligan Iron-Cleer Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 48

Culligan Iron-Cleer Скачать руководство пользователя страница 24

20

Culligan

®

Iron-Cleer

R

Water Filters

The timer uses four buttons:

Button

Description

Set-up / Enter Key (Status)

Advance timer through display options

Regeneration Key (REGEN) Initiate a regeneration
Toggle Down Key (“-”)

Decrease the setting

Toggle Up Key (“+”)

Increase the setting

Time of Day

This setting is used to program the current time of day. When in this step

the display will first show “tod” for two seconds.

After “tod” is displayed, “12:00 PM” will display (or the current set time if

already programmed) and the minutes will flash.

• The minutes are adjusted with the “+” or “-” key until the correct

value is displayed.

• Press the “Regen” key to flash the hours. Adjust with the “+” or “-”

key until the correct time is displayed.

Pressing the “Status” key will move to the next programming step. Pressing

“Regen” will move back to the minutes adjust.

Time of Regeneration

This setting is used to program the time at which a regeneration is to occur

in the delay mode, or in immediate mode with time clock backup on. The

display will first show “tor” for two seconds.

After “tor” is shown the display will then show the default of 2:00 AM (or the

current programmed time of regeneration if already set). The time can be

adjusted in 30 minute increments by pressing the “+” or “-” keys.

Pressing the “Status” key will save the setting and move to the next

programming step.

Backwash Time

This setting is used to program the cycle 1 time that is usually backwash.

The time of the cycle is kept in minutes. The display will show “buu” in the

display for two seconds and then the cycle time in the right most digits.

Adjust the value with the “+” or “-” keys.

Pressing the “Status” key will save the setting and move to the next

programming step.

«
...
22
23
24
25
26
...
»

Содержание Iron-Cleer

















































Отзывы:

Нет отзывов