background image

13.  Keep electrical and extension cords away from appliance and any hot parts and surfaces of the 

appliance during use. 

14.  The use of any accessories or attachments (including canning jars) not recommended by the 

manufacturer may cause injury.

15.  Always use Control Buttons to operate unit.
16. 

CAUTION: Keep hands and utensils out of Pitcher while blending.  DO NOT 

attempt to 

dislodge food when Blender is in operation or plugged in. A spatula/scraper may be used but 

ONLY when blender is not running and unplugged.

17.  Blender contains exposed sharp metal blades.  Use

 EXTREME CAUTION

 when handling and 

cleaning metal blades. 

18. 

When Hot Liquid is in Blender, use EXTREME CAUTION when removing Lid. DANGER: 

STEAM ESCAPING FROM BLENDER CAN CAUSE BURNS, SCALDING & SERIOUS INJURIES.

19. 

ALWAYS

 operate blender with cover in place. 

NEVER

 remove Lid when Blender is in 

operation. 

20.  When blending hot liquids, 

DO NOT

 remove center piece of two-piece cover.

21. 

DO NOT

 move this or any appliance containing 

HOT

 food, liquid or other.

22.  Avoid contact with moving parts.
23.  Make sure Blender is in 

OFF

 position and unplugged before adding or removing parts.

24.  Do not attempt to place the Pitcher onto the Base while the motor is running. Do not attempt 

to remove the Pitcher from the Base while the motor is running.

25.  Attach Blades to the Pitcher correctly before putting Pitcher onto Base. To reduce the risk of 

injury, never place Blades on Base without Pitcher properly attached.

26.  After operating continuously for three minutes, wait at least one minute before operating the 

product again to help prevent the motor from overheating.

27.  Do not run motor while Pitcher is empty.
28.  Unplug the unit before handling and cleaning.
29.  Unplug power cord from outlet when not in use. Clean and cover the unit and store in a dry 

place if not being used for an extended period of time. 

30.  This appliance is 

NOT

 recommended for outdoor use.

31. 

DO NOT

 fill Blender more than 2/3 full with food or liquid. 

32.  If Blender malfunctions during use, shut down unit 

IMMEDIATELY

 and discontinue use. 

DO 

NOT 

attempt to open any part of the base. This product has no user-serviceable parts. Always 

contact authorized Service Center if unit malfunctions or for service. 

DO NOT 

use or replace 

with any unauthorized parts not intended for this unit. All parts for this appliance must be used 

according to Instruction Manual. 

ONLY

 use manufacturer approved parts from authorized 

Service Center. Any other parts or accessories not intended for use with this appliance is strictly 

prohibited and will void warranty.

KEEP OUT OF REACH OF CHILDREN. DO NOT LEAVE APPLIANCE UNATTENDED WHEN IN USE 

OR  WHEN APPLIANCE CONTAINS HOT FOOD OR LIQUID. ALWAYS SUPERVISE CHILDREN 

WHEN THEY ARE NEAR APPLIANCE. DO NOT ALLOW CHILDREN TO OPERATE OR BE NEAR THE 

APPLIANCE WHEN IN USE.  CAUTION: BURNS, INJURY AND/OR FIRE MAY RESULT FROM NON-

COMPLIANCE WITH ALL OPERATING PROCEDURES DESCRIBED IN INSTRUCTION MANUAL. 

FOR HOUSEHOLD USE ONLY • NOT FOR COMMERCIAL USE

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

3

Содержание CBL-1048








Отзывы: