6
7
OPERATING INSTRUCTIONS
Frothing Milk
1. Remove the cover and insert the milk
frothing whisk in the recess in the bottom
of the housing.
2. Fill the tank with the desired amount of milk.
Note:
Never fill milk over the MAX fill line.
Frothed milk expands and it will
overflow the tank if the level is too high.
3. Put the cover back on the tank.
4. Start frothing by pressing the corresponding
Milk Button (top position button for HOT and bottom
position button for COLD). The LED light will be
illuminated during operation.
Note:
Preparation stops automatically after 2 minutes,
depending on the amount of milk.
5. Open the cover after frothing is complete.
6. Pour or ladle the milk froth into a cup or
glass.
7. After using the unit, clean it as described
in the Cleaning and Maintenance section,
next page.
Note:
Wait for tank to cool before cleaning.
Warming Milk
1. Remove the cover and insert the milk
warming stirrer.
2. Fill the tank with the desired amount of
milk.
Note:
Never fill milk over the MAX fill line.
3. Put the cover back on the tank.
4. Start warming milk by pressing the
corresponding Hot Milk Button (top
position). The LED light will be illuminated
during operation.
Note:
Preparation stops automatically after 2 minutes,
depending on the amount of milk.
5. Open the cover after warming is complete.
6. Pour the warmed milk into a cup or glass.
7. After using the unit, clean it as described in the
Cleaning and Maintenance section, next page.
Note:
Wait for tank to cool before cleaning.
CLEANING AND MAINTENANCE
Always make sure the appliance is unplugged before you
start cleaning it.
1.
Clean the exterior of the unit with a soft, moist cloth.
If heavily soiled, a mild detergent can be used.
2.
Remove the whisk or stirrer from tank and rinse them
with soap under warm running water. Seal on cover can
also be removed and rinsed under warm, soapy water.
3.
Clean out the tank with hot water and a soft cloth after
use. If the tank is still soiled, wash using a soap
solution and rinse thoroughly. Use a soft cloth to
prevent damaging the nonstick coating.
CAUTION:
Never submerge the base, the power cord
or plugs in water or other liquids.
4.
Any service other than cleaning and normal user
maintenance should be performed by an authorized
Cuisinart Service Representative.
TROUBLESHOOTING
Q: Why are LED lights not illuminating after I push
the corresponding button?
A:
The plug is not plugged in. Make sure plug is placed
correctly in the socket.
A:
Temperature monitoring has been triggered. Let the
unit cool for 5 minutes.
A:
Filling level was too high. Reduce the amount of milk
in the tank.
Q: Why is milk leaking from around the cover?
A:
The seal ring is missing or dirty. Clean the seal ring and
replace.
A:
The cover is not placed correctly over the milk tank.
Put the cover on so that it is flush with the tank and the
seal is not showing.
Q: Why is the milk froth not coming out the way I want?
A:
The wrong attachment may be in place in the milk tank.
Double check and make sure the milk frothing whisk
is inserted in the tank correctly.
