10
11
b. To use the iced beverage setting,
place a tall glass filled with ice on the
drip tray. Use your favorite K-Cup
®
,
select the iced beverage brew size
(4 oz. [115 ml]) and press the Brew
button. Once brewing is complete,
add more ice; add cream and sugar
if desired.
note:
There may be a short pause
before the brewing process begins.
The entire brew process lasts
approximately 1 minute and ends with
a burst of air to remove all liquid from
the K-Cup
®
.
Caution: there is very hot water in
the K-Cup
®
chamber during the brew
process. to avoid risk of injury, do
not lift the handle or open the
K-Cup
®
chamber during the brew
process.
8. Lift the handle, then remove and
dispose of the used K-Cup
®
. Close the
brewing head.
Caution: K-Cup
®
will be hot.
Following the brew, your Brewer will
automatically fill and heat in preparation for
the next brew. Your Brewer will display NOT
READY. When water reaches default
temperature, OPEN HEAD will be displayed
on the control panel and your unit will return
to Idle mode, and will be ready for your next
brew.
enjoy your cup of gourmet
coffee, tea, or hot cocoa!
Brewing
1. The control panel will display OPEN
HEAD while in idle mode.
2. Place a cup or mug on the drip tray.
The drip tray can be removed to
accommodate travel mugs.
3. Lift the handle. The brewing chamber
will open toward you.
4. Select a K-Cup
®
Portion Pack
®
.
note:
Do not remove the foil lid or
puncture the K-Cup
®
.
5. Place a K-Cup
®
in the brewing chamber
(see figure 8).
Caution: there are two sharp
needles that puncture the
K-Cup
®
, one above and one
below. to avoid risk of injury,
do not put your fingers in the
K-Cup
®
brewing chamber.
6. Lower the handle to close the brewing
chamber. When closed completely, the
control panel will indicate READY (see
figure 9).
note:
If not used within 60 seconds,
the unit will return to Idle mode and
OPEN HEAD will be displayed on the
control panel. To restart the process,
open and close the handle and control
panel will display READY again.
7. All brew size icons will be displayed with
the default size shown as a solid mug.
To choose a different size, use the
or buttons. Choose from 4-oz.
(115 ml) (iced beverage), 6-oz. (175 ml),
8-oz. (250 ml), 10-oz. (300 ml), and
12-oz. (375 ml) brew sizes.
note:
The 8-oz. (250 ml) serving is the
factory-set default brew size. To
program your favorite brew size, see
Programming Your Brew Size on page
18.
a. Once a size is chosen, press Brew.
Only the Brew button will be lit. The
control panel will now display
BREWING, as well as the serving
size you selected (see figure 10).
figure 8
figure 9
figure 10
K-Cup
Portion Pack
Ready Mode
