HELPFUL HINTS
• It is important to shave ice cubes fresh from
the freezer. Partially melted ice cubes could
keep the shaving mechanism from operating
properly.
NOTE:
If a large ice cube becomes
lodged in the unit so that the blade cannot
reach it, fl ip the toggle switch to the OFF
position and unplug from outlet. Empty
freshly shaved snow from the snow bin,
place snow bin back on the main housing,
then pour warm water down the ice chute
until lodged ice cube melts or falls free.
Empty the water from the snow bin, and dry
thoroughly before placing back on the main
housing. Resume feeding ice cubes through
the ice chute.
• If needed, additional paper cones can be
purchased online.
CLEANING AND
MAINTENANCE
Before performing any cleaning and
maintenance operations, please be sure that
the toggle switch is in the OFF position and
that the unit is unplugged.
1. NEVER IMMERSE UNIT IN WATER OR PLACE
IT IN DISHWASHER.
2.
WARNING:
BLADE IS SHARP. DO NOT come
in contact with the blade or attempt to reach
inside the ice chute to clean the blade.
3. To clean the blade shaving mechanism, pour
warm water down the ice chute to clear any
ice or syrup residue that may have become
lodged inside while crushing ice.
4. Wash snow bin, plastic cones and ice
scooper using a non abrasive cleanser
and water, or place on the top rack of the
dishwasher. Dry thoroughly.
5. Wipe main housing and ice press with a
clean, damp cloth.
Any other servicing should be completed by an
authorized service center.
Limited Three-Year Warranty
(U.S. and Canada ONLY)
This warranty is available to consumers only.
You are a consumer if you own a Cuisinart
™
Snow Cone Maker that was purchased at retail
for personal, family or household use. Except
as otherwise required under applicable law, this
warranty is not available to retailers or other
commercial purchasers or owners.
We warrant that your Cuisinart
™
Snow Cone
Maker will be free of defects in materials and
workmanship under normal home use for 3
years from the date of original purchase. We
recommend that you visit our website,
www.
cuisinart.com
for a fast, effi cient way to
complete your product registration. However,
product registration does not eliminate the need
for the consumer to maintain the original proof
of purchase in order to obtain the warranty
benefi ts. In the event that you do not have
proof of purchase date, the purchase date for
purposes of this warranty will be the date of
manufacture.
If your Cuisinart
™
Snow Cone Maker should
prove to be defective within the warranty period,
we will repair it, or if we think necessary, replace
it. To obtain warranty service, simply call our
toll-free number 1-800-726-0190 for additional
information from our Consumer Service
Representatives, or send the defective product
to Consumer Service Center at Cuisinart, 7475
North Glen Harbor Blvd., Glendale, AZ 85307.
To facilitate the speed and accuracy of your
return, please enclose $10.00 for shipping and
handling of the product.
Please pay by check or money order made
payable to Cuisinart (California residents need
only supply proof of purchase and should call
1-800-726-0190 for shipping instructions).
NOTE:
For added protection and secure
handling of any Cuisinart product that is being
returned, we recommend you use a traceable,
insured delivery service. Cuisinart cannot be
held responsible for in-transit damage or for
packages that are not delivered to us. Lost and/
or damaged products are not covered under
warranty. Please be sure to include your return
address, daytime phone number, description
of the product defect, product model number
(located on bottom of product), original date of
purchase, and any other information pertinent to
the product’s return.
5
