4
5
ASSEMBLY
To use your Cuisinart
®
ReMix6.0 600-Watt Blender,
begin by assembling the blender jar.
1. Turn the blender jar (a) upside down, and place it
flat on a sturdy surface.
Note:
You may need to position the rubber gasket
(b) into the groove of the blade assembly if not
tightly in place.
2. Turn the blade assembly (c) upside down, and
place the blade end in the blender jar opening.
Note:
Blades are sharp… handle carefully.
3. Twist blade assembly (c) clockwise until secure.
HELPFUL REMINDERS
• Once the cover is in position, additional
ingredients can be added during blending by
simply lifting the measured pour lid, adding ingre-
dients, and replacing the measured pour lid.
•
Cover should always be in place while the unit is
on.
•
Warning:
Do not place blender jar on base while
motor is running.
• Do not remove blade assembly from blender jar
when removing blender jar from base. Simply lift
blender jar from motor base.
•
Boiling liquids or solid frozen foods (with the
exception of ice cubes or ½-inch [1.3 cm] pieces of
frozen fruit) should never be put into the blender jar.
• Do not put ice, frozen foods or very cold liquids
into a blender jar that has come directly from a
hot dishwasher.
• Do not put very hot liquids or foods into a blender
jar that has come directly from the freezer. Boiling
liquids should cool for 5 minutes before being
poured into blender jar.
• Follow Cleaning and Maintenance instructions on
page 6, prior to your first use.
OPERATION
1. Place the motor base of your Cuisinart
®
ReMix6.0
600-Watt Blender on a flat, sturdy surface.
It is important that the surface be clean and
dry. Assemble the blender jar by following the
Assembly Instructions. Once the jar is assembled
and is in position on the motor base, plug the unit
into an electrical outlet.
2. Put all necessary ingredients into the blender
jar and replace the cover. You may add more
ingredients by lifting the measured pour lid and
dropping ingredients through the fill area. Replace
the measured pour lid after adding ingredients. Do
not put hands into blender jar with blender plugged
in.
Note:
Add liquid ingredients first, then follow
with solid ingredients. This will provide more
consistent blending and prevent unnecessary
stress on the motor.
Note:
To remove blender jar cover, lift edge of
cover upward. Lifting measured pour lid will not
remove cover.
3.
Start blending:
Press the I/O button. The red LED
indicator light will illuminate and flash,
indicating that the blender is turned on but
no speed has been selected.
4.
Choose blending speed:
Press High, Low or Ice
Crush buttons to determine the speed at which
you would like to blend the ingredients. Both the
On (I/O) indicator light and the activated speed
indicator lights will glow. The blender will now be
functioning at the desired speed. It is possible to
switch speeds without pressing the I/O button, by
simply pushing another speed button.
WARNING:
FLASHING RED LIGHT INDICATES
READY TO OPERATE. DO NOT TOUCH BLADES.
Pulse mode:
The Pulse mode allows you to create a burst of power
for quick, efficient blending. To use the Pulse function,
push the I/O button and the red LED indicator light will
illuminate. Push the Pulse button and the blue Pulse LED
indicator light will blink. Push and release the desired
speed button. Repeat as desired. You determine the
duration of each pulse. While pulsing, the blue LED
indicator light will glow. The Pulse function can be used
to break apart larger pieces of food or to control the
texture of food when chopping. The Pulse function is
also effective in starting the blending process when
you do not want continuous power, or when
processing items that do not require an extended
amount of blending.
FEATURES AND BENEFITS
1. Cover
Just press on. Tightfitting seal resists leakage.
2. Measured Pour Lid
Allows you to measure and add ingredients
without removing the cover.
3. 48-oz. (1.25 L) BPA Free Tritan
®
Co-polyester Jar
Has a unique, sturdy, wide-mouth design.
4. High-quality Blade Assembly with Patented
Stainless Steel Blades
Is strong enough for all blending tasks,
including tough jobs like crushing ice.
5. Electronic Touchpad Controls
a.
I/O Button
Turns blender on or off.
b.
High Button
Choose High speed to blend ingredients to
the desired consistency. Blue LED lights will
indicate which speed you are using.
c.
Low Button
Choose Low speed to blend ingredients to
the desired consistency. Blue LED lights will
indicate which speed you are using.
d. Ice Crush Button
Press Ice Crush and begin crushing. This
button is pre-programmed and will stop
blending when cycle is complete.
e.
Pulse Button
Allows you to pulse at High or Low speeds,
so you can blend ingredients only as much
as needed.
6. Powerful Motor Base
Power to handle a wide variety of blending tasks.
7. Slip-proof Feet (not shown)
Prevent movement during use and prevent
damaging marks on countertops or tables.
8. Cord Storage (not shown)
Keeps countertop safe and neat by
conveniently storing excess cord.
*
Tritan is a registered trademark of Eastman Chemical
Company.
Note: Blades are sharp.
Handle carefully.
2.
6.
5.
1.
3.
4
.
8.
7.
c.
a.
b.
