6
BEFORE YOU BEGIN
Read all instructions completely for detailed operating procedures. The
battery in your EvolutionX
™
Cordless Rechargeable Compact Blender has
not been fully charged. Before the first use of this appliance, the battery
must be charged until 3 blue LED lights are illuminated. See Charging
Your Compact Blender/Battery Life below.
CHARGING YOUR COMPACT
BLENDER/BATTERY LIFE
The batteries in your EvolutionX™ Cordless Rechargeable Compact
Blender have not been fully charged. Before the first use of this
appliance, the batteries must be charged until all 3 blue battery indicator
lights illuminate. With a full charge, your compact blender will run for
approximately 20 minutes, depending on load. Your compact blender will
be fully charged in approximately 2 hours.
HOW TO READ
THE BATTERY LIFE INDICATOR
r8IFOTUMJHIUJTGMBTIJOHBOEPUIFSTBSFPGGCBUUFSZDBQBDJUZJT
40%.
r8IFOTUMJHIUJTTPMJEBOEOEMJHIU
is flashing, battery capacity is
40% – 70%.
r8IFOTUBOEOEMJHIUTBSFTPMJEBOESEMJHIUJTGMBTIJOHCBUUFSZ
capacity is
70% – 95%.
r8IFO#BUUFSZ-JGF*OEJDBUPS-&%-JHIU#BSEJTQMBZTTPMJECMVFQPXFS
lights, battery capacity is
95%.
(NOTE: A 95% charge for a lithium ion
battery is considered a full charge.)
QUICK-CHARGE FEATURE
Your Cordless Rechargeable Compact Blender is equipped with a quick-
charge feature. If your power handle runs out of power, you can “quick
charge” your unit:
r$IBSHFGPSNJOVUFTUPHFU
25 seconds
of runtime.
r$IBSHFGPSNJOVUFTUPHFU
1 minute
and 45 seconds of runtime.
r$IBSHFGPSNJOVUFTUPHFU
5 minutes
and 45 seconds of runtime.
r$IBSHFGPSIPVSTGPS
20 minutes of runtime
(full charge)
NOTE:
Do not leave your compact blender uncharged for an extended
period of time, as it will affect the life of the rechargeable battery.
ASSEMBLY
After washing all parts, please see below for assembly.
Place base on flat surface and plug in.
1.
Place blending cup on flat surface.
2.
Attach blending blade/mixing assembly on round opening of the cup
and turn clockwise until tightened.
OPERATION
1.
Put food ingredients into the blending cup, and then attach the blade
assembly.
2.
With the base unit stable, place the assembled blending cup onto the
base and turn to lock into place.
3.
For continuous operation: Press the power button once, the LEDs are
displayed, then press again to turn unit on. Press once more to turn
unit off.
4.
When you have finished blending, press the Power button to turn
