1. Place the cup or container
under the steam/hot water
nozzle and turn the function
knob to the setting
(28).
2. Once you have dispensed
the required amount of hot
water into the cup or
container, stop the hot water
by turning the large function
knob to the off position (29).
3. Remove the cup or
container and swing the
steam/hot water wand over
the drip tray to catch any
drips of water (30).
CLEANING AND
MAINTENANCE
Always turn the Espresso Maker off and remove
the plug from the electrical outlet before cleaning.
Never immerse unit in water or other liquid. To
clean, simply wipe with a clean damp cloth and
dry before storing.
CLEANING THE FILTERS, PORTAFILTER
HOLDER AND BREW HEAD
r5IFTUBJOMFTTTUFFMGJMUFSTBOEQPSUBGJMUFSIPMEFS
should be rinsed under water immediately after
use to remove all coffee particles. You may
also use a cleaning pin to clean the opening.
r1FSJPEJDBMMZSVOXBUFSUISPVHIUIFNBDIJOF
with the portafilter holder in place, but without
any ground coffee, to rinse out any lingering
coffee particles. The inside of the brew head
should be wiped with a damp cloth to remove
any coffee particles.
CLEANING THE OUTER HOUSING/CUP
WARMING PLATE
t
The outer housing and cup warming plate can
be cleaned with a soft, damp cloth.
Do not use any scouring agents or harsh
cleaners.
CLEANING THE DRIP TRAY
t
The drip tray can be removed after the grate is
removed and then cleaned with a soft, damp
cloth. Do not use any scouring agents or
harsh cleaners.
r5IFESJQUSBZDBOCFXBTIFEJOXBSNTPBQZ
water and rinsed thoroughly. Use a non-
abrasive washing liquid. Do not use any
scouring agents or harsh cleaners.
NOTE:
Do not clean any of the parts or
accessories in the dishwasher.
CLEANING THE STEAM WAND
r5IFTUFBNXBOETIPVMEBMXBZTCFDMFBOFE
after steaming milk.
r8JQFUIFTUFBNXBOEXJUIBEBNQDMPUIUIFO
with the steam wand directed back into the drip
tray, momentarily set the function knob to the
hot water setting. This will release any
remaining milk from inside the steam wand.
r&OTVSFUIFMBSHFGVODUJPOLOPCJTJOUIFPGG
position. Press the power button off, unplug
the power cord and allow the machine to cool.
r*GUIFTUFBNXBOESFNBJOTCMPDLFEVTFB
cleaning pin to clear the opening.
DECALCIFICATION
Decalcification refers to the removal of calcium
deposits that form over time on the metal parts
of the coffeemaker.
For best performance from your espresso maker,
decalcify the unit from time to time. The
frequency depends on the hardness of your tap
water and how often you use the coffeemaker.
To clean, fill the water reservoir to capacity with
a mixture of 1∕3 white vinegar and 2∕3 water. Be
sure the power button is in the off position, and
the unit is unplugged. Remove the portafilter
holder. Pour the decalcifying agent into the water
reservoir, plug the machine back in, and power
the unit back on. Set the power button to on and
the large function knob to the off position. Place
a large container under the brew head and
steam wand. When brewing temperature is
reached, the heating light will switch off. Set the
large function knob to the espresso position
and let half of the solution run through the brew
head. Set the large function knob to steam
position and allow the remaining solution to run
through the steam wand. When the solution
stops running, set the large function knob back
to the off position. After decalcifying, let one
cycle of fresh cold water through the unit before
using the unit again to brew coffee. Any other
servicing should be performed by an authorized
service representative.
28
29
30
9
