Cuisinart DLC-2009M Series, Инструкция по эксплуатации

Страница: 7 / 73

7
THE MACHINE
INCLUDES:
1. Housing base with a vertically projecting
shaft and convenient touchpad control
panel
2. 9-cup work bowl
3. Cover with Cuisinart ® Supreme Wide
Mouth Feed Tube
4. Pusher assembly that slides inside the
feed tube
5. Sharp metal chopping/mixing
6. Serrated slicing disc
7. Shredding disc
8. Detachable stem for discs (not shown)
9. Plastic spatula (not shown)
10. BPA Free (not shown)
All materials that come in contact with food
or liquid are BPA free.
The metal chopping blade chops raw and
cooked fruits, vegetables, meat, fi sh and
cheese to the exact consistency you want,
from coarse to fi ne, even to a purée.
It chops nuts, makes nut butters,
mayonnaise and sauces, and mixes tender,
fl aky pastry. The metal chopping blade
also kneads yeasted doughs, mixes cakes,
frostings, cookies, quick breads, muffi ns,
and biscuits.
The slicing disc makes beautiful whole
slices without torn edges. It slices whole
fruits and vegetables, cooked meat,
semi-frozen raw meat and loaves of bread.
The shredding disc processes most fi rm
and hard cheeses into long, attractive
shreds. It also shreds vegetables like
potatoes, carrots and zucchini, and
processes nuts and chocolate to a
grated texture.
The detachable stem fi ts both discs,
making disc storage compact in
limited space.
The pusher assembly has two parts.
1. A small, removable, clear pusher that fi ts
into a small center-located feed tube.
This tube is for narrow food like carrots,
for adding liquid, and for continuous
feeding of small food like garlic.
2. A large pusher that fi ts into the
Cuisinart
® Supreme ® feed tube opening
and moves freely within it. Upon contact,
the large pusher meets an activating rod
in the center of the work bowl handle,
permitting the motor to start.
ASSEMBLY
INSTRUCTIONS
Blade Operation
1. Plug in the housing base and place the
work bowl on top, with the work bowl
handle just to the left of center. Turn the
work bowl counterclockwise to lock it
onto the housing base.
2. Carefully lift and place the chosen blade
over the work bowl center shaft. Line up
the markings on the blade hub with the
motor shaft. Blade should fi t snugly and
rest on the bottom of the work bowl.
3. Add desired ingredients to work bowl.
4. Place work bowl cover on work bowl,
with the handle area just to the left of
center. Turn counterclockwise to lock
onto work bowl.
5. Align pusher assembly and activating rod
with the feed tube opening on the work
bowl cover and slide the activating rod
down to the bottom.
6. You are now ready to operate
the machine.
Disc Operation
1. Plug in the housing base and place the
work bowl on top, with the work bowl
handle just to the left of center. Turn the
work bowl counterclockwise to lock it
onto the housing base.
2. Choose desired disc and place
underside-up on tabletop. Pick up
detachable disc stem and align it with
the raised plastic crescent on the disc
underside. The raised ‘lock’ indicator on
the left corner of the stem should be to
the left of the mounting plate on disc.
3. Turn the stem to the right, so the locking
tabs are covered by the metal supports
and a ‘click’ locks the stem in place.