Cuisinart DGB-800C Series, Инструкция пользователя

Страница: 8 / 16

CHARCOAL WATER FILTER
Your coffeemaker comes with a
charcoal water filter that eliminates
chlorine, bad tastes and odours from
tap water.
Inserting the Water Filter
• Remove the filter from polybag and
soak it, fully immersed, in cold tap
water for 15 minutes.
• Lift the water filter holder out of the
water reservoir.
• Press down on the filter compartment
and pull toward you to open.
• Place filter into the holder and snap
it closed. Be careful – improper
placement can tear the filter skin.
• Flush filter by running cold tap water
through holes in bottom of
compartment for 10 seconds.
• Allow the filter to drain completely.
• Slide the water filter holder back into
the channel in the water reservoir,
pushing it down to the base of the
unit.
NOTE:
We recommend changing the
water filter every 60 days or after
60 uses, and more
often if you have
hard water.
Replacement filters
can be purchased
in stores, by calling
Cuisinart customer
service, or at
www.cuisinart.ca.
8
SETTING THE AUTOMATIC
SHUTOFF TIME
Your coffeemaker can be programmed to
automatically shut off from 0 to 4 hours after
brewing is complete. Shutoff time can be
programmed before, during or after brewing.
Default shutoff time is 2 hours.
Entering Automatic Shutoff Time Mode
To view the current setting, press the ON/
OFF button to turn on the coffeemaker, then
press the Program button twice. The Auto
OFF icon will appear and the default (2:00)
or previously selected time will be displayed.
Set desired shutoff time by pressing and
holding the Program button until the time
begins to flash. Press the Hour and Minute
buttons to scroll from 0 to 4 hours. To exit,
do nothing for 5 seconds. To deactivate Auto
OFF, follow the instructions under Entering
Automatic Shutoff Time Mode and set the
time to (0:00).
NOTE: The Auto OFF icon will only appear
on the LCD display during programming
mode.
Programming Automatic Shutoff Time
Mode After Brewing Has Started
When programming shutoff time after
brewing has started, the unit automatically
accounts for elapsed time. For example, if
you set the shutoff time for 1 hour, and
25 minutes have already elapsed, the unit
will shut off after 35 minutes (60 – 25 =
35 minutes).