Cuisinart DGB-700, Инструкция пользователя

Страница: 13 / 17

13
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
The
coffeemaker is
Continuously
beeping
The Hopper is not locked
in place (when brewing
with whole beans) • Check to see if the hopper container release knob is in the unlocked position
• Place the hopper container on the unit
• Turn the knob to the locked position
• Press On/Off to resume; if programming, reset
Filter door is not closed • Check to be sure that all components of the filter compartment are in place
• Close filter door (you will hear a click if the door is properly shut)
• Press On/Off twice to resume; if programming, reset
Filter basket is not in
place • Open filter door by pressing the filter door release button
• Hook filter basket with cover onto door
• Close filter door (you will hear a click if the door is properly shut)
• Press On/Off twice to resume; if programming, reset
Filter basket cover is
not in place • Open filter door by pressing the filter door release button
• Put on cover matching the “grind” arrows
• Hook filter basket with cover onto door
• Close filter door (you will hear a click if the door is properly shut)
• Press On/Off twice to resume; if programming, reset
Filter basket is not
emptied of used grinds • Open filter door by pressing the filter door release button
• Remove filter basket with cover
• Discard used grounds
• Replace filter basket with cover and close door
• Press On/Off twice to resume; if programming, reset
Coffee is
weaker than
usual
Coffee chute is clogged • Remove the hopper from the unit
• Lift coffee channel cover
• Clean out coffee chute
• Replace channel cover and hopper
• Your coffeemaker is now ready to brew again
There are not enough
beans in the hopper • Be sure there are enough beans in your hopper for the amount of coffee you
intend to brew
Strength setting
is incorrect • Check your strength setting — displayed on the LCD screen
• To change your strength settings press the strength control button
The
coffeemaker
is not grind-
ing beans
Ground coffee may be
packed too tightly in the
coffee chute • Remove hopper from the unit
• Lift coffee channel cover
• Clean out coffee chute
• Replace channel cover and hopper
The hopper may be
too full • Remove some of the beans from the hopper