background image

7

PROGRAMMING YOUR 
COFFEEMAKER

TO BREW COFFEE

1. Turn the function knob to “Brew.”

2.  Press the On/Off button and release. 

The red On indicator light will illuminate 
and brew cycle will begin.

TO TURN THE COFFEEMAKER OFF

Press the On/Off button and release.

Note:

 This coffeemaker shuts off automatically 

after brewing is complete.

PROGRAMMING YOUR COFFEEMAKER 
FOR DELAYED BREW TIME

To set the time:

  1. Turn the function knob to “Clock.” 

 

 a.

  Set Hour: 

Press and hold the Hour 

button to scroll through numbers 
quickly. When number displayed 
approaches the desired setting, press 
and release (pulse) the button to 
advance one digit at a time. After 
setting the correct hour, the default will 
be the last time set unless power is 
shut off.

NOTE: 

When the number count passes 12, 

the PM light will be displayed on the LCD. 

 

 

b.

  Set Minutes: 

Press and hold the 

Minute button to scroll through 
numbers quickly. When number 
displayed approaches the desired 
setting, press and release (pulse) the 
button to advance one digit at a time. 
After setting the correct minute, the 
default will be the last time set unless 
power is shut off. To finish setting time, 
turn the Function Knob to any other 
setting or simply wait until the numbers 
stop blinking.

To program the Auto On (brew start time)

  1. Turn the function knob to “Prog.”

  2. Set the time you want coffee to begin 

brewing by using the minute and hour 
push-buttons. Follow the same 
instructions you used to set the time of 
day, in the 

To set the time

 section above. 

  3. Turn the function knob to “Auto On.” LCD 

will display the current time.

  4. Press the On/Off button and release. The 

green indicator light will come on to 
remind you that the programming function 
is in use. At the programmed time, the 
red indicator will come on as well, 
indicating that the brew cycle is starting. 
Both lights will go off when keep warm 
cycle ends.

NOTE:

 To reactivate the auto-on feature to 

start brew cycle at the same time another day, 
simply press the On/Off button and release. 
The green Auto-On light will illuminate.

1 - 4 Cup Setting

The 1- 4 cup setting button is used when you 
make small amounts of coffee. The 1-4 cup 
setting basically double heats the water, 
making your smaller amount piping hot.

To use: 

When making a smaller amount, press 

the 1-4 button on the control panel after 
turning on the unit. 

Power Loss Back-up

One-minute protection in case a breaker trips, 
the unit is unplugged, or the power fails. It 
holds all programmed information, including 
time of day, auto on time and auto off time.

Содержание DCC-1150 Series


























Отзывы: