7
WHISK ATTACHMENT
1. Align the motor body housing with the
assembled whisk attachment and push the
pieces together until you hear and feel them
click together. It may be helpful to press the
release button when assembling.
Note: Whisk and gearbox are detachable
from one another.
REVERSIBLE BLADE
The Cuisinart
®
Smart Stick
®
Two Speed Hand Blender chopper/grinder
attachment is equipped with a reversible blade. This blade is sharp on
one side and blunt on the other. The blade is attached to a plastic ring
that slides over the plastic blade sheath, so it can be easily turned
over to select the appropriate blade. To reverse the blade, see detailed
instructions below. Also see Frequent Uses for Chopper/Grinder
(page 13).
Assemble the parts.
1. Place the work bowl on a flat, dry, stable
surface. It should be close to an electrical
outlet of the same voltage as stated on
the rating plate on the hand blender.
2. The metal blade assembly shaft (A) is
attached to the bottom of the work bowl.
If not already in place, slide the fully
assembled blade assembly (B) over the
top of the metal blade assembly shaft.
2a. Put together the blade assembly if not assembled:
Very carefully connect the blade ring (C) to the plastic blade
sheath (D). Line up the blade ring opening with the plastic
sheath. There are notches (E) on opposite sides of the interior
of the hub. These fit over ridges on the sides of the plastic
blade sheath (G). Let the blade ring slide to the bottom of the
plastic sheath. HOLD THE BLADE RING BY THE CENTRAL
HUB HOLDING RIBS (grips) (F) ONLY. DO NOT TOUCH THE
RAZOR-SHARP BLADES. Pick up the blade ring by its hub
B
A
